Quick Answer: A freight class calculator finds your shipment’s density, which is the weight divided by the cubic feet, and matches it to an NMFC freight class. Under the density scale that started in July 2025, heavier, denser freight gets a lower class like 50 or 55, and light, bulky freight gets a higher class like 250 or 400. A lower class usually means a cheaper LTL rate.

Freight class calculator

Loading the calculator…

If you ship LTL freight, the class on your bill of lading has a big effect on the price. Get it wrong and the carrier can re-class the shipment and send you a bigger bill. This freight class calculator works out density the same way carriers do and gives you the estimated class in a few seconds.

How to Use the Freight Class Calculator

  1. Measure the length, width and height in inches, including the pallet and any part that sticks out.
  2. Enter the number of pieces and the weight per piece, pallet included.
  3. Read the density and the estimated class.
  4. Check the tip under the result. It tells you how close you are to a cheaper class.

How Freight Density Is Calculated

  1. Multiply length Ă— width Ă— height in inches.
  2. Divide by 1,728 to get cubic feet.
  3. Divide the total weight by the cubic feet. The answer is pounds per cubic foot.

Example: a 48 Ă— 40 Ă— 48 inch pallet is 53.3 cubic feet. At 600 pounds, the density is about 11.25 lb per cubic foot, which falls in class 92.5.

The NMFC Density Scale (Since July 2025)

In July 2025 the National Motor Freight Classification moved many items to a density-based scale with 13 classes.

Density (lb per cubic foot)Class
Less than 1400
1 to less than 2300
2 to less than 4250
4 to less than 6175
6 to less than 8125
8 to less than 10100
10 to less than 1292.5
12 to less than 1585
15 to less than 22.570
22.5 to less than 3065
30 to less than 3560
35 to less than 5055
50 or more50
How freight density sets LTL class

How to Lower Your Freight Class

  • Pack tighter. Less empty space in the box means higher density.
  • Use smaller pallets when the freight allows it.
  • Do not overhang. Carriers measure the outside edges, including anything sticking out.
  • Combine pieces on one pallet if it raises density.
  • Measure carefully. Rounding up a few inches on every side can push you into a higher class.

Frequently Asked Questions

What is the most common freight class?

Many general palletized shipments fall between class 70 and class 125, but it depends on what you ship and how it is packed.

Does a higher freight class cost more?

Usually yes. Higher classes are for lighter, bulkier freight that takes more space for its weight, so carriers charge more per pound.

Is this freight class calculator always right?

It gives an estimate from density. Some products still have their own NMFC item and class. Confirm with your carrier for important shipments.

Sources and further reading: NMFTA National Motor Freight Classification, FMCSA